Parts & upgrades that fit the Voron Switchwire
The Voron Switchwire is a mid-size printer with a 250 × 210 × 240 mm build volume (12.6 liters), smaller than 73% of the 376 printers we track.
Its slicer profile lists profiles for 0.15 mm, 0.2 mm, 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1 mm nozzles.
We found 5 parts listed as compatible with it, led by 2 hotends & heaters, 2 spare parts and 1 electronics & sensors, from 4 stores: E3D, Fabreeko, Printed Solid and West3D.
Where to buy the Voron Switchwire
Hotends & heaters for the Voron Switchwire
E3D Revo™ Voron Coldside
“Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1 .”
E3D Revo" Voron LDO Special Edition RapidChange Hot End (Revo Voron) 24V
Listed as compatibleHotends & heatersLDOsold by West3D“Compatible with Voron Afterburner/Stealthburner, Legacy, Switchwire, Trident, Voron 0, Voron 1, Voron 2 .”
Electronics & sensors for the Voron Switchwire
Voron Skirt button pcb by Fysetc
Listed as compatibleElectronics & sensorsFYSETCsold by Fabreeko“Compatible with different sizes of Voron V2.4/Trident/Switchwire.”
Spare parts for the Voron Switchwire
Revo Voron Coldside Kit
“Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1 .”
West3D Stainless Steel Fastener Kit for Voron Switchwire (BDF)
Listed as compatibleSpare partsWest3D
Filament for the Voron Switchwire
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Switchwire
Compare build volumes →
Tools for the Switchwire
All tools →Voron Switchwire questions
What is the build volume of the Voron Switchwire?
250 × 210 × 240 mm (width × depth × height), about 12.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Voron Switchwire support?
Its slicer profile includes 0.15 mm, 0.2 mm, 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Voron Switchwire?
2 listings name the Voron Switchwire as compatible, including E3D Revo™ Voron Coldside (Printed Solid) and E3D Revo" Voron LDO Special Edition RapidChange Hot End (Revo Voron) 24V (West3D). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Voron Switchwire?
Creality CR-10 SE (220 × 220 × 265 mm), BIQU Hurakan (220 × 220 × 270 mm) and Creality Ender-3 S1 (220 × 220 × 270 mm).
Did a part fit your Switchwire?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
