Material guide
Nylon (PA) print temperature and settings
Tough, wear-resistant and slippery, good for gears and hinges, but it absorbs moisture fast and must be printed dry.
Across the 3 Nylon (PA) lines we track, the median recommended range is 260–290 °C at the nozzle and 50–90 °C on the bed.
What you need to print Nylon (PA)
Enclosure neededA warm, draft-free chamber prevents warping and cracking.
Brass nozzle is fineNo abrasive fill.
Keep it dryAbsorbs moisture; dry it and store it sealed for clean prints. Dryers and spool parts →
Any extruderWorks with direct drive and Bowden.
Good for
- gears, bushings and hinges
- parts that flex repeatedly
Watch out for
- Absorbs moisture within hours; print from a dry box
- Warps; an enclosure helps a lot
Nylon (PA) temperatures by brand
| Brand | Nozzle | Range | Bed | Colors |
|---|---|---|---|---|
| add:north | 260–275 °C | 50–90 °C | 8 | |
| Bambu Lab | 290–290 °C | 90–90 °C | 1 | |
| Polymaker | 250–300 °C | 25–50 °C | 4 |
Compare Nylon (PA) filament prices on Amazon.Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Printers with a heated chamber
Nylon (PA) prints best warm and enclosed. These printers list an actively heated chamber.
Frequently asked questions
What temperature should I print Nylon (PA) at?
Most brands recommend about 260–290 °C at the nozzle and 50–90 °C on the bed (median of 3 brands). Use your brand's own range when you have it.
Do I need an enclosure for Nylon (PA)?
Yes. Nylon (PA) warps and cracks in drafts; an enclosed, warm printer gives far better results.
Does Nylon (PA) need a hardened nozzle?
No. A standard brass nozzle is fine.