Bambu Lab PA print temperature and settings
The settings Bambu Lab publishes for its PA: 290 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Bambu Lab's recommended nozzle range is about 15°C hotter than the typical PA across the 3 PA lines we track (median 260–290°C).
Print settings
| Nozzle | 290 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.17 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 3 PA lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Bambu Lab sells.
| Spool | 1.75 mm |
|---|---|
| 500 g | ≈ 178 m |
Printing Nylon (PA)
Full Nylon (PA) guide →Tough, wear-resistant and slippery, good for gears and hinges, but it absorbs moisture fast and must be printed dry.
1 Bambu Lab PA colors
- Support for PA/PET
Frequently asked questions
What temperature should I print Bambu Lab PA at?
Bambu Lab lists 290–290°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Bambu Lab PA?
About 355 m at 1.75 mm, from its published density of 1.17 g/cm³.
How many colors does Bambu Lab PA come in?
1 in the data we track, including Support for PA/PET.