Material guide
PET-CF (carbon fiber PET) print temperature and settings
PET reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PET, with a matte finish.
Across the 3 PET-CF (carbon fiber PET) lines we track, the median recommended range is 220–250 °C at the nozzle and 70–90 °C on the bed. Tectonic 3D starts lowest (220 °C) and Bambu Lab goes highest (270 °C).
What you need to print PET-CF (carbon fiber PET)
Enclosure helpsA warm, draft-free chamber prevents warping and cracking.
Hardened nozzle neededAbrasive fill wears brass quickly. Nozzles by printer →
Keep it dryAbsorbs moisture; dry it and store it sealed for clean prints. Dryers and spool parts →
Any extruderWorks with direct drive and Bowden.
Good for
- stiff brackets and functional parts
- parts that must hold their shape
- a matte surface that hides layer lines
Watch out for
- The carbon fiber is abrasive and wears a brass nozzle out quickly
- Lower layer adhesion and toughness than the unfilled material
- A 0.4 mm nozzle can clog; 0.6 mm is a common choice
PET-CF (carbon fiber PET) temperatures by brand
| Brand | Nozzle | Range | Bed | Colors |
|---|---|---|---|---|
| Bambu Lab | 270–270 °C | 90–90 °C | 1 | |
| Tectonic 3D | 220–250 °C | 70–90 °C | 1 | |
| Tinmorry | 220–250 °C | 70–90 °C | 1 |
Compare PET-CF (carbon fiber PET) filament prices on Amazon.
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print PET-CF (carbon fiber PET) at?
Most brands recommend about 220–250 °C at the nozzle and 70–90 °C on the bed (median of 3 brands). Use your brand's own range when you have it.
Do I need an enclosure for PET-CF (carbon fiber PET)?
Not strictly, but an enclosure reduces warping on larger PET-CF (carbon fiber PET) prints.
Does PET-CF (carbon fiber PET) need a hardened nozzle?
Yes. The fiber fill is abrasive and wears out brass nozzles quickly; use hardened steel or tungsten carbide.