Bambu Lab PET-CF print temperature and settings
The settings Bambu Lab publishes for its PET-CF: 270 °C at the nozzle and 90 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
Bambu Lab's recommended nozzle range is about 35°C hotter than the typical PET-CF across the 3 PET-CF lines we track (median 220–250°C).
Print settings
| Nozzle | 270 °C | |
|---|---|---|
| Bed | 90 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 3 PET-CF lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size Bambu Lab sells.
| Spool | 1.75 mm |
|---|---|
| 500 g | ≈ 161 m |
| 1 kg | ≈ 322 m |
Printing PET-CF (carbon fiber PET)
Full PET-CF (carbon fiber PET) guide →PET reinforced with chopped carbon fiber: stiffer and more dimensionally stable than plain PET, with a matte finish.
1 Bambu Lab PET-CF colors
- Black
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print Bambu Lab PET-CF at?
Bambu Lab lists 270–270°C at the nozzle and 90–90°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of Bambu Lab PET-CF?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does Bambu Lab PET-CF come in?
1 in the data we track, including Black.