Snapmaker J1 specs and build volume
The Snapmaker J1 is a large printer with a 324 × 200 × 200 mm build volume (13.0 liters), smaller than 71% of the 376 printers we track.
Its slicer profile lists 2 toolheads for multi-material printing and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Snapmaker J1 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Snapmaker J1
Filament for the Snapmaker J1
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the J1
Compare build volumes →
Tools for the J1
All tools →Snapmaker J1 questions
What is the build volume of the Snapmaker J1?
324 × 200 × 200 mm (width × depth × height), about 13.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Snapmaker J1 support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Snapmaker J1?
BIQU Hurakan (220 × 220 × 270 mm), Creality Ender-3 S1 (220 × 220 × 270 mm) and Creality Ender-3 S1 Pro (220 × 220 × 270 mm).
Did a part fit your J1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
