Parts & upgrades that fit the Creality CR-10 SE
The Creality CR-10 SE is a mid-size printer with a 220 × 220 × 265 mm build volume (12.8 liters), smaller than 71% of the 376 printers we track.
Its slicer profile lists an actively heated chamber, which helps with ABS, ASA, PC and nylon and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
We found 4 parts listed as compatible with it, led by 2 hotends & heaters, 1 nozzles and 1 build plates, from 2 stores: 3D Printing Canada and Micro Swiss.
Nozzles for the Creality CR-10 SE
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4
Listed as compatibleNozzlesMicro Swiss$14.99View at Micro Swiss
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Hotends & heaters for the Creality CR-10 SE
Official CR-10 SE Hotend Adapter Board
CA$24.99View at 3D Printing Canada
FlowTech™ Hotend for Creality CR-10 SE
Listed as compatibleHotends & heatersMicro Swiss$64.99View at Micro Swiss
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Build plates for the Creality CR-10 SE
Official Creality CR-10 SE Build Plate Kit
CA$34.95View at 3D Printing Canada
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Printers a similar size to the CR-10 SE
Compare build volumes →
Creality CR-10 SE questions
What is the build volume of the Creality CR-10 SE?
220 × 220 × 265 mm (width × depth × height), about 12.8 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Creality CR-10 SE support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which nozzles fit the Creality CR-10 SE?
1 listing names the Creality CR-10 SE as compatible, including Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4 (Micro Swiss). Check each listing's note for revision or adapter requirements.
Which hotends fit the Creality CR-10 SE?
2 listings name the Creality CR-10 SE as compatible, including Official CR-10 SE Hotend Adapter Board (3D Printing Canada) and FlowTech™ Hotend for Creality CR-10 SE (Micro Swiss). Check each listing's note for revision or adapter requirements.
Which build plates fit the Creality CR-10 SE?
1 listing names the Creality CR-10 SE as compatible, including Official Creality CR-10 SE Build Plate Kit (3D Printing Canada). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Creality CR-10 SE?
Voron Switchwire (250 × 210 × 240 mm), BIQU Hurakan (220 × 220 × 270 mm) and Creality Ender-3 S1 (220 × 220 × 270 mm).
Did a part fit your CR-10 SE?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.