Material guide
PVA print temperature and settings
A water-soluble support material, paired with PLA on multi-material printers so supports wash away.
Across the 3 PVA lines we track, the median recommended range is 215–225 °C at the nozzle and 50–60 °C on the bed. Tectonic 3D starts lowest (180 °C) and Bambu Lab goes highest (240 °C).
What you need to print PVA
No enclosure neededPrints fine on an open-frame printer.
Brass nozzle is fineNo abrasive fill.
Keep it dryAbsorbs moisture; dry it and store it sealed for clean prints. Dryers and spool parts →
Any extruderWorks with direct drive and Bowden.
Good for
- dissolvable supports for complex PLA prints
Watch out for
- Extremely moisture-sensitive: store and print it dry
- Needs a printer with two toolheads or a material changer
PVA temperatures by brand
| Brand | Nozzle | Range | Bed | Colors |
|---|---|---|---|---|
| Bambu Lab | 240–240 °C | 55–55 °C | 1 | |
| Polymaker | 215–225 °C | 25–60 °C | 1 | |
| Tectonic 3D | 180–210 °C | 50–60 °C | 1 |
Compare PVA filament prices on Amazon.As an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print PVA at?
Most brands recommend about 215–225 °C at the nozzle and 50–60 °C on the bed (median of 3 brands). Use your brand's own range when you have it.
Do I need an enclosure for PVA?
No. PVA prints well on open-frame printers.
Does PVA need a hardened nozzle?
No. A standard brass nozzle is fine.