Parts & upgrades that fit the Creality K1
The Creality K1 is a mid-size printer with a 220 × 220 × 250 mm build volume (12.1 liters), smaller than 82% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm, 0.6 mm and 0.8 mm nozzles.
We found 40 parts listed as compatible with it, led by 15 nozzles, 6 electronics & sensors and 5 extruders & gears, from 6 stores: 3D Printing Canada, E3D, Fabreeko, Micro Swiss, Phaetus and West3D.
Where to buy the Creality K1
Nozzles for the Creality K1
All 15 nozzles →Hardened Steel Nozzle for K1/K1 Max - 0.2mm (2 Pack)
“Wide Compatibility – Designed specifically for Creality K1 and K1 Max printers..”
Hardened Steel Nozzle for K1/K1 Max - 0.4mm (2 Pack)
“Wide Compatibility – Designed specifically for Creality K1 and K1 Max printers..”
Hardened Steel Nozzle for K1/K1 Max - 0.6mm (2 Pack)
“Wide Compatibility – Designed specifically for Creality K1 and K1 Max printers..”
Hardened Steel Nozzle for K1/K1 Max - 0.8mm (2 Pack)
“Wide Compatibility – Designed specifically for Creality K1 and K1 Max printers..”
Hotends & heaters for the Creality K1
Complete Ceramic Hotend for K1/K1 Max
“The Complete Ceramic Hotend is an advanced upgrade designed for Creality's K1 and K1 Max 3D printers, aiming to enhance printing performance, speed, and material compatibility..”
Micro Swiss FlowTech™ Hotend for Creality K1 / K1C / K1 Max
Listed as compatibleHotends & heatersMicro Swisssold by 3D Printing CanadaOfficial Creality K1 Ceramic Heating Block Kit
FlowTech™ Hotend for Creality K1 / K1 Max / K1C / K1 SE
Listed as compatibleHotends & heatersMicro Swiss
Build plates for the Creality K1
Creality K1 Textured / Smooth Spring Steel Build Plate
Official Creality K1 Hotbed Plate Kit
Official Creality K1 Smooth PEI Build Plate
Extruders & gears for the Creality K1
All 5 extruders & gears →Official Creality K1 Extruder Mechanism (No Motor)
Official Creality K1/K1 Max Extruder Mechanism Kit
Creality K1, K1C & K1 Max Extruder Gears by Fysetc
Listed as compatibleExtruders & gearsFYSETCsold by FabreekoPhaetus DXC Extruder Helical Dual-Drive for Creality K1/K1C/K1 Max
Listed as compatibleExtruders & gearsPhaetussold by Fabreeko
Electronics & sensors for the Creality K1
All 6 electronics & sensors →Micro Swiss FlowTech™ Hotend Adapter Cables for newer Creality K1, K1 Max, K1C and K1 SE
Listed as compatibleElectronics & sensorsMicro Swisssold by 3D Printing CanadaOfficial Creality K1/K1 Max Circular Stepper Motor
Official Creality K1 Mainboard Kit
Official Creality K1 Touchscreen Kit
Enclosure & cooling for the Creality K1
Official Creality K1/K1 Max 3010 Axial Fan
Official Creality K1/K1 Max 4020 Blower Fan
Cameras & monitoring for the Creality K1
Official Creality K1/K1 Max: HD AI Camera
Upgrade kits for the Creality K1
Creality K1 Series CFS Upgrade Accessory Kit ( K1, K1 Max, K1C, K1 SE )
Spare parts for the Creality K1
Official Creality K1 Timing Belt
FlowTech™ Spare Hardware Kit for Older Creality K1 printers
Listed as compatibleSpare partsMicro SwissFlowTech™ Spare Hardware Kit for Newer Creality K1, K1 Max, K1C printers
Listed as compatibleSpare partsMicro Swiss
Filament for the Creality K1
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the K1
Compare build volumes →
Tools for the K1
All tools →Creality K1 questions
What is the build volume of the Creality K1?
220 × 220 × 250 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Creality K1 support?
Its slicer profile includes 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which nozzles fit the Creality K1?
15 listings name the Creality K1 as compatible, including Hardened Steel Nozzle for K1/K1 Max - 0.2mm (2 Pack) (3D Printing Canada), Hardened Steel Nozzle for K1/K1 Max - 0.4mm (2 Pack) (3D Printing Canada) and Hardened Steel Nozzle for K1/K1 Max - 0.6mm (2 Pack) (3D Printing Canada). Check each listing's note for revision or adapter requirements.
Which hotends fit the Creality K1?
4 listings name the Creality K1 as compatible, including Complete Ceramic Hotend for K1/K1 Max (3D Printing Canada), Micro Swiss FlowTech™ Hotend for Creality K1 / K1C / K1 Max (3D Printing Canada) and Official Creality K1 Ceramic Heating Block Kit (3D Printing Canada). Check each listing's note for revision or adapter requirements.
Which build plates fit the Creality K1?
3 listings name the Creality K1 as compatible, including Creality K1 Textured / Smooth Spring Steel Build Plate (3D Printing Canada), Official Creality K1 Hotbed Plate Kit (3D Printing Canada) and Official Creality K1 Smooth PEI Build Plate (3D Printing Canada). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Creality K1?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Anycubic Kobra 2 (220 × 220 × 250 mm).
Did a part fit your K1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
