Parts & upgrades that fit the Anycubic Kobra 2
The Anycubic Kobra 2 is a mid-size printer with a 220 × 220 × 250 mm build volume (12.1 liters), smaller than 82% of the 376 printers we track.
We found 1 parts listed as compatible with it, led by 1 hotends & heaters, from 1 store: 3D Printing Canada.
Where to buy the Anycubic Kobra 2
Hotends & heaters for the Anycubic Kobra 2
Anycubic Kobra 2 Hotend
Filament for the Anycubic Kobra 2
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Kobra 2
Compare build volumes →
Tools for the Kobra 2
All tools →Anycubic Kobra 2 questions
What is the build volume of the Anycubic Kobra 2?
220 × 220 × 250 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anycubic Kobra 2 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Anycubic Kobra 2?
1 listing names the Anycubic Kobra 2 as compatible, including Anycubic Kobra 2 Hotend (3D Printing Canada). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Anycubic Kobra 2?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Artillery Genius (220 × 220 × 250 mm).
Did a part fit your Kobra 2?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
