Parts & upgrades that fit the Anycubic Kobra 3
The Anycubic Kobra 3 is a mid-size printer with a 255 × 255 × 260 mm build volume (16.9 liters), smaller than 58% of the 376 printers we track.
Its slicer profile lists an actively heated chamber, which helps with ABS, ASA, PC and nylon and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
We found 1 parts listed as compatible with it, led by 1 upgrade kits, from 1 store: Anycubic.
Where to buy the Anycubic Kobra 3
Upgrade kits for the Anycubic Kobra 3
ACE Pro for Kobra 3 Upgrade Kit
Listed as compatibleUpgrade kitsAnycubic
Filament for the Anycubic Kobra 3
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- ABSStock setupPrints on the stock setup
- ASAStock setupPrints on the stock setup
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCStock setupDry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- ABS+Stock setupPrints on the stock setup
- HIPSStock setupPrints on the stock setup
- PAStock setupDry before printing
- PVAStock setupDry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
Printers a similar size to the Kobra 3
Compare build volumes →
Tools for the Kobra 3
All tools →Anycubic Kobra 3 questions
What is the build volume of the Anycubic Kobra 3?
255 × 255 × 260 mm (width × depth × height), about 16.9 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anycubic Kobra 3 support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Anycubic Kobra 3?
Bambu Lab A1 (256 × 256 × 256 mm), Bambu Lab P2S (256 × 256 × 256 mm) and Bambu Lab X2D (256 × 256 × 261 mm).
Did a part fit your Kobra 3?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
