Material guide
PCTG print temperature and settings
A tougher relative of PETG, with better impact strength and clarity and similar ease of printing.
Across the 4 PCTG lines we track, the median recommended range is 255–265 °C at the nozzle and 90–100 °C on the bed. AzureFilm starts lowest (250 °C) and Extrudr goes highest (270 °C).
What you need to print PCTG
No enclosure neededPrints fine on an open-frame printer.
Brass nozzle is fineNo abrasive fill.
Keep it dryAbsorbs moisture; dry it and store it sealed for clean prints. Dryers and spool parts →
Any extruderWorks with direct drive and Bowden.
Good for
- impact-resistant functional parts
- clear or translucent prints
Watch out for
- Fewer brands and colors than PETG
- Likes to be printed dry
PCTG temperatures by brand
| Brand | Nozzle | Range | Bed | Colors |
|---|---|---|---|---|
| 3DJAKE | 260–260 °C | 100–100 °C | 13 | |
| AzureFilm | 250–250 °C | 80–80 °C | 4 | |
| Extrudr | 270–270 °C | 110–110 °C | 8 | |
| Spectrum | 250–270 °C | 60–100 °C | 4 |
Compare PCTG filament prices on Amazon.
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print PCTG at?
Most brands recommend about 255–265 °C at the nozzle and 90–100 °C on the bed (median of 4 brands). Use your brand's own range when you have it.
Do I need an enclosure for PCTG?
No. PCTG prints well on open-frame printers.
Does PCTG need a hardened nozzle?
No. A standard brass nozzle is fine.