AzureFilm PCTG print temperature and settings
The settings AzureFilm publishes for its PCTG: 250 °C at the nozzle and 80 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
AzureFilm's recommended nozzle range is about 10°C cooler than the typical PCTG across the 4 PCTG lines we track (median 255–265°C).
Print settings
| Nozzle | 250 °C | |
|---|---|---|
| Bed | 80 °C | |
| Density | 1.29 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 4 PCTG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size AzureFilm sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 322 m |
Printing PCTG
Full PCTG guide →A tougher relative of PETG, with better impact strength and clarity and similar ease of printing.
4 AzureFilm PCTG colors
- BLACK
- GREY
- TRANSPARENT
- WHITE
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Frequently asked questions
What temperature should I print AzureFilm PCTG at?
AzureFilm lists 250–250°C at the nozzle and 80–80°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of AzureFilm PCTG?
About 322 m at 1.75 mm, from its published density of 1.29 g/cm³.
How many colors does AzureFilm PCTG come in?
4 in the data we track, including BLACK, GREY, TRANSPARENT and WHITE.