3DJAKE PCTG print temperature and settings
The settings 3DJAKE publishes for its PCTG: 260 °C at the nozzle and 100 °C on the bed. Start in the middle of the range, then adjust for your printer, speed and cooling.
3DJAKE's recommended nozzle range is right in line with the typical PCTG across the 4 PCTG lines we track (median 255–265°C).
Print settings
| Nozzle | 260 °C | |
|---|---|---|
| Bed | 100 °C | |
| Density | 1.24 g/cm³ | |
| Diameters | 1.75 mm | |
Bars run on a fixed scale; the dashed line is the median of the 4 PCTG lines we track. Data from SpoolmanDB.
How much filament is on a spool
Length from the published density, for each spool size 3DJAKE sells.
| Spool | 1.75 mm |
|---|---|
| 1 kg | ≈ 335 m |
Printing PCTG
Full PCTG guide →A tougher relative of PETG, with better impact strength and clarity and similar ease of printing.
13 3DJAKE PCTG colors
- Black
- Dark Blue
- Dark Green
- Light Blue
- Light Green
- Red
- Silver
- Transparent
- Transparent Blue
- Transparent Green
- Transparent Red
- Transparent Yellow
- White
Frequently asked questions
What temperature should I print 3DJAKE PCTG at?
3DJAKE lists 260–260°C at the nozzle and 100–100°C for the bed. Start mid-range, then go hotter for faster printing or better layer bonding and cooler if you see stringing.
How many meters are on a 1 kg spool of 3DJAKE PCTG?
About 335 m at 1.75 mm, from its published density of 1.24 g/cm³.
How many colors does 3DJAKE PCTG come in?
13 in the data we track, including Black, Dark Blue, Dark Green and Light Blue.