Parts & upgrades that fit the Anker M5C
The Anker M5C is a mid-size printer with a 220 × 220 × 250 mm build volume (12.1 liters), smaller than 82% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.25 mm, 0.4 mm and 0.6 mm nozzles.
We found 1 parts listed as compatible with it, led by 1 nozzles, from 1 store: E3D.
Where to buy the Anker M5C
Nozzles for the Anker M5C
DiamondBack AnkerMake M5/M5C Nozzles
Filament for the Anker M5C
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the M5C
Compare build volumes →
Tools for the M5C
All tools →Anker M5C questions
What is the build volume of the Anker M5C?
220 × 220 × 250 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anker M5C support?
Its slicer profile includes 0.2 mm, 0.25 mm, 0.4 mm and 0.6 mm nozzles. 0.4 mm is the usual default.
Which nozzles fit the Anker M5C?
1 listing names the Anker M5C as compatible, including DiamondBack AnkerMake M5/M5C Nozzles (E3D). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Anker M5C?
Anycubic Kobra (220 × 220 × 250 mm), Anycubic Kobra 2 (220 × 220 × 250 mm) and Artillery Genius (220 × 220 × 250 mm).
Did a part fit your M5C?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.