Parts & upgrades that fit the Voron Trident
The Voron Trident is a large printer with a 350 × 350 × 250 mm build volume (30.6 liters), larger than 60% of the 376 printers we track.
Its slicer profile lists profiles for 0.15 mm, 0.2 mm, 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1 mm nozzles.
We found 28 parts listed as compatible with it, led by 8 electronics & sensors, 4 hotends & heaters and 4 build plates, from 5 stores: BIQU, E3D, Fabreeko, Printed Solid and West3D.
Hotends & heaters for the Voron Trident
BIGTREETECH E3D Revo Voron 3D Printer Hotend Kit 24V 40W Max 300°C for Voron 0.1/ Voron 2.4/ Voron Trident/ Voron Swithwire/ Voron Legacy
$128.52View at BIQU
E3D Voron Heatsink for Revo
Listed as compatibleHotends & heatersE3Dsold by Fabreeko“Compatible with Voron Afterburner/Stealth burner, Legacy, Switch wire, Trident, Voron 0, Voron 1, Voron 2.”
$30.99View at Fabreeko
E3D Revo™ Voron Coldside
“Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1 .”
$38.89View at Printed Solid
E3D Revo" Voron LDO Special Edition RapidChange Hot End (Revo Voron) 24V
Listed as compatibleHotends & heatersLDOsold by West3D“Compatible with Voron Afterburner/Stealthburner, Legacy, Switchwire, Trident, Voron 0, Voron 1, Voron 2 .”
$89.99View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Build plates for the Voron Trident
Mandala Roseworks Voron MagBed Cast Tooling Plate (5083 Alloy) Build Plates for V2.4 / Trident and V0
Listed as compatibleBuild platesMandala Roseworkssold by West3D$64.99View at West3D
Voron Trident Aluminum Build Plate Complete Kit by LDO Systems (Heater, Magnet, and fuse pre-applied to plate)
Listed as compatibleBuild platesLDOsold by West3D$134.99View at West3D
Voron Trident Build MIC6 Aluminum Build Plate
Listed as compatibleBuild platesSHsold by West3D$84.99View at West3D
Voron V2.4 and Trident Aluminum Build Plate Complete Kit by LDO Systems (Heater, Magnet, and fuse pre-applied to plate)
Listed as compatibleBuild platesLDOsold by West3D$134.99View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Electronics & sensors for the Voron Trident
All 8 electronics & sensors →
CNC Voron Tap Sensor V1.0
“It helps reduce first-layer issues and supports high-speed, high-quality printing on Voron 2.4, Voron Trident, and compatible custom builds..”
$14.99View at BIQU
BIGTREETECH Eddy DUO Leveling Sensor USB & CAN
Listed as compatibleElectronics & sensorsBIGTREETECHsold by Fabreeko“Eddy Duo is also compatible with Voron Trident, VZBot, BlQU Hurakan and other 3D Printers that runs Klipper.”
$26.99View at Fabreeko
Voron Skirt button pcb by Fysetc
Listed as compatibleElectronics & sensorsFYSETCsold by Fabreeko“Compatible with different sizes of Voron V2.4/Trident/Switchwire.”
$20.99View at Fabreeko
Voron V2.4 Trident Cable chain Kit
Listed as compatibleElectronics & sensorsFabreeko$19.99View at Fabreeko
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Enclosure & cooling for the Voron Trident
Voron Trident - Bed Fan Mount
Listed as compatibleEnclosure & coolingMandala Roseworkssold by Fabreeko$39.00View at Fabreeko
Clicky-Clack Fridge Door Kit for Voron Trident by LDO Motors - Complete kit with panels
Listed as compatibleEnclosure & coolingLDOsold by West3D$62.99View at West3D
Front Panel for Clicky-Clack Fridge Door in Cast Acrylic for Voron Trident by LDO Motors
Listed as compatibleEnclosure & coolingWest3D$16.99View at West3D
Voron Trident R2 - Side, Top and Door Panels
Listed as compatibleEnclosure & coolingMandala Roseworkssold by West3D$36.00View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Upgrade kits for the Voron Trident
LDO CNC all wheel drive kit for Voron v2.4 and Trident
Listed as compatibleUpgrade kitsLDOsold by Fabreeko$104.99View at Fabreeko
Voron Trident Ultimate Motion kit by HoneyBadger
Listed as compatibleUpgrade kitsHoneyBadgersold by Fabreeko$69.99View at Fabreeko
LDO Voron CNC AWD Kit (V2.4 or Trident)
Listed as compatibleUpgrade kitsLDOsold by West3D$109.99View at West3D
Matched Height Kinematic Kit for Voron V2.4 and Trident by Mandala Roseworks
Listed as compatibleUpgrade kitsMandala Roseworkssold by West3D$88.00View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Spare parts for the Voron Trident
Revo Voron Coldside Kit
“Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1 .”
£30.00View at E3D
Voron trident Stainless steel hardware kit
Listed as compatibleSpare partsFabreeko$79.99View at Fabreeko
Rigid Aluminum Front Idlers For Voron Printers with 4 CNC Belt Clamps by Vitalii3D
Listed as compatibleSpare partsVitalii3Dsold by West3D“- Compatible with Voron v2.4 and Trident .”
$53.99View at West3D
West3D Stainless Steel Fastener Kit for Voron Trident (BDF)
Listed as compatibleSpare partsWest3D$69.99View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Printers a similar size to the Trident
Compare build volumes →
Voron Trident questions
What is the build volume of the Voron Trident?
350 × 350 × 250 mm (width × depth × height), about 30.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Voron Trident support?
Its slicer profile includes 0.15 mm, 0.2 mm, 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Voron Trident?
4 listings name the Voron Trident as compatible, including BIGTREETECH E3D Revo Voron 3D Printer Hotend Kit 24V 40W Max 300°C for Voron 0.1/ Voron 2.4/ Voron Trident/ Voron Swithwire/ Voron Legacy (BIQU), E3D Voron Heatsink for Revo (Fabreeko) and E3D Revo™ Voron Coldside (Printed Solid). Check each listing's note for revision or adapter requirements.
Which build plates fit the Voron Trident?
4 listings name the Voron Trident as compatible, including Mandala Roseworks Voron MagBed Cast Tooling Plate (5083 Alloy) Build Plates for V2.4 / Trident and V0 (West3D), Voron Trident Aluminum Build Plate Complete Kit by LDO Systems (Heater, Magnet, and fuse pre-applied to plate) (West3D) and Voron Trident Build MIC6 Aluminum Build Plate (West3D). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Voron Trident?
Sovol SV06 Plus (300 × 300 × 340 mm), Prusa CORE One L (300 × 300 × 331 mm) and Comgrow T300 (300 × 300 × 350 mm).
Did a part fit your Trident?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.