Parts & upgrades that fit the Voron 0.1
The Voron 0.1 is a compact printer with a 120 × 120 × 120 mm build volume (1.7 liters), smaller than 99% of the 376 printers we track.
Its slicer profile lists profiles for 0.15 mm, 0.2 mm, 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1 mm nozzles.
We found 33 parts listed as compatible with it, led by 19 electronics & sensors, 4 hotends & heaters and 4 upgrade kits, from 6 stores: 3D Printing Canada, BIQU, E3D, Fabreeko, Printed Solid and West3D.
Hotends & heaters for the Voron 0.1
BIGTREETECH E3D Revo Voron 3D Printer Hotend Kit 24V 40W Max 300°C for Voron 0.1/ Voron 2.4/ Voron Trident/ Voron Swithwire/ Voron Legacy
$128.52View at BIQU
E3D Voron Heatsink for Revo
Listed as compatibleHotends & heatersE3Dsold by Fabreeko“Compatible with Voron Afterburner/Stealth burner, Legacy, Switch wire, Trident, Voron 0, Voron 1, Voron 2.”
$30.99View at Fabreeko
E3D Revo™ Voron Coldside
“Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1 .”
$38.89View at Printed Solid
E3D Revo" Voron LDO Special Edition RapidChange Hot End (Revo Voron) 24V
Listed as compatibleHotends & heatersLDOsold by West3D“Compatible with Voron Afterburner/Stealthburner, Legacy, Switchwire, Trident, Voron 0, Voron 1, Voron 2 .”
$89.99View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Build plates for the Voron 0.1
Mandala Roseworks Voron MagBed Cast Tooling Plate (5083 Alloy) Build Plates for V2.4 / Trident and V0
Listed as compatibleBuild platesMandala Roseworkssold by West3D$64.99View at West3D
Voron V0.1 Build 120mm MIC6 Aluminum Build Plate
Listed as compatibleBuild platesSHsold by West3D$44.99View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Electronics & sensors for the Voron 0.1
All 19 electronics & sensors →
BigTreeTech CB1 V2.2 IO Board
“In combination with the PI4B adapter or the Manta mainboards, there is also compatibility with Klipper firmware: Manta M8P (high compatibility with Voron 2.4 and VzBoT) and Manta M4P (high compatibility with Voron V0 and Ender 3).”
CA$24.99View at 3D Printing Canada
BTT SKR Pico V1.0 Control Board Compatible with Raspberry Pi or BTT Pi for Voron V0
$39.85View at BIQU
LDO-36STH20-1004AHG(XH) Motor for Voron 0.1 & Voron Stealthburner
$36.82View at BIQU
LDO-42STH25-1004CL200E(VRN) v0.1 z motor
Listed as compatibleElectronics & sensorsLDOsold by Fabreeko$28.99View at Fabreeko
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Enclosure & cooling for the Voron 0.1
Voron V0 and V0.1 and V0.2 Clear Acrylic Sheets for Top Hat
$10.20View at Printed Solid
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Upgrade kits for the Voron 0.1
V0.1 to V0.2 Upgrade kit by LDO & Honeybadger
Listed as compatibleUpgrade kitsLDOsold by Fabreeko$29.99View at Fabreeko
Berserker V0.1 / V0.2 Motion Kit
Listed as compatibleUpgrade kitsBerserkersold by West3D$99.99View at West3DWest3D's Motion Kit "BDM" Kit for Voron V0.1/V0.2 Black (Darkside)
Listed as compatibleUpgrade kitsWest3D$44.99View at West3DWest3D's Motion Kit "BDM" Kit for Voron V0.1/V0.2 Silver
Listed as compatibleUpgrade kitsWest3D$39.99View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Spare parts for the Voron 0.1
Revo Voron Coldside Kit
“Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, & Voron 0.1 .”
£30.00View at E3D
LDO V0/0.1 Linear rails Kit (5 pieces) 440C stainless 150mm
Listed as compatibleSpare partsLDOsold by Fabreeko$104.99View at Fabreeko
LDO T-Nut Bar Kit Voron V0/V0.1/V0.2
Listed as compatibleSpare partsLDOsold by West3D$8.95View at West3D
Paid link: as an Amazon Associate we earn from qualifying purchases.Search Amazon
Printers a similar size to the 0.1
Compare build volumes →
Voron 0.1 questions
What is the build volume of the Voron 0.1?
120 × 120 × 120 mm (width × depth × height), about 1.7 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Voron 0.1 support?
Its slicer profile includes 0.15 mm, 0.2 mm, 0.25 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Voron 0.1?
4 listings name the Voron 0.1 as compatible, including BIGTREETECH E3D Revo Voron 3D Printer Hotend Kit 24V 40W Max 300°C for Voron 0.1/ Voron 2.4/ Voron Trident/ Voron Swithwire/ Voron Legacy (BIQU), E3D Voron Heatsink for Revo (Fabreeko) and E3D Revo™ Voron Coldside (Printed Solid). Check each listing's note for revision or adapter requirements.
Which build plates fit the Voron 0.1?
2 listings name the Voron 0.1 as compatible, including Mandala Roseworks Voron MagBed Cast Tooling Plate (5083 Alloy) Build Plates for V2.4 / Trident and V0 (West3D) and Voron V0.1 Build 120mm MIC6 Aluminum Build Plate (West3D). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Voron 0.1?
RolohaunDesign Rolohaun Delta Flyer Refit (110 × 110 × 115 mm), RolohaunDesign Rook MK1 LDO (110 × 110 × 111 mm) and MM slb (125 × 125 × 160 mm).
Did a part fit your 0.1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.