Parts & upgrades that fit the Comgrow T300
The Comgrow T300 is a large printer with a 300 × 300 × 350 mm build volume (31.5 liters), larger than 61% of the 376 printers we track.
We found 8 parts listed as compatible with it, led by 5 nozzles, 1 hotends & heaters and 1 extruders & gears, from 2 stores: Sovol and West3D.
Where to buy the Comgrow T300
Stores that list the T300 itself, with their listed price when we last read them.
Nozzles for the Comgrow T300
All 5 nozzles →Hardened Steel 0.4/0.6mm Nozzle Kit For SV08/T300
Listed as compatibleNozzlesSovolSV06 ACE/SV06 PLUS ACE Hardened Steel Nozzle Kit
Listed as compatibleNozzlesSovol“Compatible Models: SV08, T300, SV06 ACE, SV06 PLUS ACE.”
Metal Nozzle Kits for SV08/T300
Listed as compatibleNozzlesSovolSOVOL SV08 & Comgrow T300 Nozzles
Listed as compatibleNozzlesSovolsold by West3D
Hotends & heaters for the Comgrow T300
Comgrow T300 Metal Hotend Kit
Listed as compatibleHotends & heatersSovol
Extruders & gears for the Comgrow T300
Comgrow T300 Extruder
Listed as compatibleExtruders & gearsSovol
Electronics & sensors for the Comgrow T300
Comgrow T300 Klipper Screen
Listed as compatibleElectronics & sensorsSovol
Filament for the Comgrow T300
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the T300
Compare build volumes →
Tools for the T300
All tools →Comgrow T300 questions
What is the build volume of the Comgrow T300?
300 × 300 × 350 mm (width × depth × height), about 31.5 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Comgrow T300 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which nozzles fit the Comgrow T300?
5 listings name the Comgrow T300 as compatible, including Hardened Steel 0.4/0.6mm Nozzle Kit For SV08/T300 (Sovol), SV06 ACE/SV06 PLUS ACE Hardened Steel Nozzle Kit (Sovol) and Metal Nozzle Kits for SV08/T300 (Sovol). Check each listing's note for revision or adapter requirements.
Which hotends fit the Comgrow T300?
1 listing names the Comgrow T300 as compatible, including Comgrow T300 Metal Hotend Kit (Sovol). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Comgrow T300?
Sovol SV06 Plus ACE (300 × 300 × 350 mm), Sovol SV07 Plus (300 × 300 × 350 mm) and Voron Trident (350 × 350 × 250 mm).
Did a part fit your T300?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.