Parts & upgrades that fit the Sovol SV07 Plus
The Sovol SV07 Plus is a large printer with a 300 × 300 × 350 mm build volume (31.5 liters), larger than 61% of the 376 printers we track.
We found 7 parts listed as compatible with it, led by 4 nozzles, 2 build plates and 1 electronics & sensors, from 3 stores: Micro Swiss, Sovol and West3D.
Where to buy the Sovol SV07 Plus
Nozzles for the Sovol SV07 Plus
Micro Swiss Brass Plated Nozzle for Sovol SV06 Plus / SV07 / SV07 Plus
Listed as compatibleNozzlesMicro SwissHigh Flow Nozzles for SV06 Plus/SV07/SV07 Plus/T500
Listed as compatibleNozzlesSovolHardened Nozzles for SV06 Plus/SV07/SV07 Plus/T500
Listed as compatibleNozzlesSovolNozzles for SOVOL SV06 Plus / SV07 / SV07 Plus / T500
Listed as compatibleNozzlesSovolsold by West3D
Build plates for the Sovol SV07 Plus
PEI Flexible Steel Plate for SV07 Plus
Listed as compatibleBuild platesSovolSOVOL SV07 Plus Build Plate + Magnet (OEM)
Listed as compatibleBuild platesSovolsold by West3D
Electronics & sensors for the Sovol SV07 Plus
Replacement SV07 / SV07 Plus Toolhead and X Motor Cable
Listed as compatibleElectronics & sensorsSovolsold by West3D
Filament for the Sovol SV07 Plus
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the SV07 Plus
Compare build volumes →
Tools for the SV07 Plus
All tools →Sovol SV07 Plus questions
What is the build volume of the Sovol SV07 Plus?
300 × 300 × 350 mm (width × depth × height), about 31.5 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Sovol SV07 Plus support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which nozzles fit the Sovol SV07 Plus?
4 listings name the Sovol SV07 Plus as compatible, including Micro Swiss Brass Plated Nozzle for Sovol SV06 Plus / SV07 / SV07 Plus (Micro Swiss), High Flow Nozzles for SV06 Plus/SV07/SV07 Plus/T500 (Sovol) and Hardened Nozzles for SV06 Plus/SV07/SV07 Plus/T500 (Sovol). Check each listing's note for revision or adapter requirements.
Which build plates fit the Sovol SV07 Plus?
2 listings name the Sovol SV07 Plus as compatible, including PEI Flexible Steel Plate for SV07 Plus (Sovol) and SOVOL SV07 Plus Build Plate + Magnet (OEM) (West3D). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Sovol SV07 Plus?
Comgrow T300 (300 × 300 × 350 mm), Sovol SV06 Plus ACE (300 × 300 × 350 mm) and Voron Trident (350 × 350 × 250 mm).
Did a part fit your SV07 Plus?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
