Geeetech A10 Pro specs and build volume
The Geeetech A10 Pro is a mid-size printer with a 220 × 220 × 260 mm build volume (12.6 liters), smaller than 74% of the 376 printers we track.
Its slicer profile lists a bowden extruder and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Geeetech A10 Pro yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Geeetech A10 Pro
Filament for the Geeetech A10 Pro
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- TPUCheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- TPU-95ACheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the A10 Pro
Compare build volumes →
Tools for the A10 Pro
All tools →Geeetech A10 Pro questions
What is the build volume of the Geeetech A10 Pro?
220 × 220 × 260 mm (width × depth × height), about 12.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Geeetech A10 Pro support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Geeetech A10 Pro?
Voron Switchwire (250 × 210 × 240 mm), Creality CR-10 SE (220 × 220 × 265 mm) and BIQU Hurakan (220 × 220 × 270 mm).
Did a part fit your A10 Pro?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.