Geeetech A20 specs and build volume
The Geeetech A20 is a mid-size printer with a 250 × 250 × 260 mm build volume (16.3 liters), smaller than 62% of the 376 printers we track.
Its slicer profile lists a bowden extruder and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Geeetech A20 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Geeetech A20
Filament for the Geeetech A20
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- TPUCheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- TPU-95ACheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the A20
Compare build volumes →
Tools for the A20
All tools →Geeetech A20 questions
What is the build volume of the Geeetech A20?
250 × 250 × 260 mm (width × depth × height), about 16.3 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Geeetech A20 support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Geeetech A20?
Bambu Lab P1P (256 × 256 × 250 mm), Bambu Lab P1S (256 × 256 × 250 mm) and Bambu Lab X1 (256 × 256 × 250 mm).
Did a part fit your A20?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.