Snapmaker A250 QS+B Kit specs and build volume
The Snapmaker A250 QS+B Kit is a mid-size printer with a 230 × 250 × 209 mm build volume (12.0 liters), smaller than 82% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Snapmaker A250 QS+B Kit yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Snapmaker A250 QS+B Kit
Filament for the Snapmaker A250 QS+B Kit
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the A250 QS+B Kit
Compare build volumes →
Tools for the A250 QS+B Kit
All tools →Snapmaker A250 QS+B Kit questions
What is the build volume of the Snapmaker A250 QS+B Kit?
230 × 250 × 209 mm (width × depth × height), about 12.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Snapmaker A250 QS+B Kit support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Snapmaker A250 QS+B Kit?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Anycubic Kobra 2 (220 × 220 × 250 mm).
Did a part fit your A250 QS+B Kit?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
