Snapmaker A250 BKit specs and build volume
The Snapmaker A250 BKit is a mid-size printer with a 230 × 250 × 224 mm build volume (12.9 liters), smaller than 71% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Snapmaker A250 BKit yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Snapmaker A250 BKit
Filament for the Snapmaker A250 BKit
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the A250 BKit
Compare build volumes →
Tools for the A250 BKit
All tools →Snapmaker A250 BKit questions
What is the build volume of the Snapmaker A250 BKit?
230 × 250 × 224 mm (width × depth × height), about 12.9 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Snapmaker A250 BKit support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Snapmaker A250 BKit?
Creality CR-10 SE (220 × 220 × 265 mm), BIQU Hurakan (220 × 220 × 270 mm) and Creality Ender-3 S1 (220 × 220 × 270 mm).
Did a part fit your A250 BKit?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
