Parts & upgrades that fit the Creality K1 SE
The Creality K1 SE is a mid-size printer with a 220 × 220 × 250 mm build volume (12.1 liters), smaller than 82% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm, 0.6 mm and 0.8 mm nozzles.
We found 5 parts listed as compatible with it, led by 2 electronics & sensors, 1 hotends & heaters and 1 extruders & gears, from 3 stores: 3D Printing Canada, Fabreeko and Micro Swiss.
Where to buy the Creality K1 SE
Hotends & heaters for the Creality K1 SE
FlowTech™ Hotend for Creality K1 / K1 Max / K1C / K1 SE
Listed as compatibleHotends & heatersMicro Swiss
Extruders & gears for the Creality K1 SE
Phaetus DXC Extruder Helical Dual-Drive for Creality K1/K1C/K1 Max
Listed as compatibleExtruders & gearsPhaetussold by Fabreeko“K1-series fit : designed for Creality K1/K1C/K1 Max (some vendors also note K1 SE; check your SKU).”
Electronics & sensors for the Creality K1 SE
Micro Swiss FlowTech™ Hotend Adapter Cables for newer Creality K1, K1 Max, K1C and K1 SE
Listed as compatibleElectronics & sensorsMicro Swisssold by 3D Printing CanadaHotend Adapter Cables for newer Creality K1, K1 Max, K1C, and K1 SE
Listed as compatibleElectronics & sensorsMicro Swiss
Upgrade kits for the Creality K1 SE
Creality K1 Series CFS Upgrade Accessory Kit ( K1, K1 Max, K1C, K1 SE )
Filament for the Creality K1 SE
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the K1 SE
Compare build volumes →
Tools for the K1 SE
All tools →Creality K1 SE questions
What is the build volume of the Creality K1 SE?
220 × 220 × 250 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Creality K1 SE support?
Its slicer profile includes 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Creality K1 SE?
1 listing names the Creality K1 SE as compatible, including FlowTech™ Hotend for Creality K1 / K1 Max / K1C / K1 SE (Micro Swiss). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Creality K1 SE?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Anycubic Kobra 2 (220 × 220 × 250 mm).
Did a part fit your K1 SE?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
