Parts & upgrades that fit the Creality Ender-3 V2
The Creality Ender-3 V2 is a mid-size printer with a 220 × 220 × 250 mm build volume (12.1 liters), smaller than 82% of the 376 printers we track.
We found 9 parts listed as compatible with it, led by 4 electronics & sensors, 2 spare parts and 1 hotends & heaters, from 3 stores: 3D Printing Canada, BIQU and West3D.
Where to buy the Creality Ender-3 V2
Hotends & heaters for the Creality Ender-3 V2
Official Creality Ender 3 Series Nozzle Thermistor
Build plates for the Creality Ender-3 V2
Creality Ender 3 V2 Hotbed Plate - OEM Heater with connected wire
Listed as compatibleBuild platesCrealitysold by West3D
Electronics & sensors for the Creality Ender-3 V2
Official Creality Ender 3 V2 32bit Replacement Silent Control Board
Official Creality Ender 3 Series Touch Screen
Official Creality Ender 3 V2 Replacement Screen bracket
Official Creality Ender 3 V2 32bit Control Board
Enclosure & cooling for the Creality Ender-3 V2
Official Creality Fan Cover for Ender 3 V2
Spare parts for the Creality Ender-3 V2
Official Creality Ender-3 V2 Repair Kit Complete Maintenance Equipment
4Pcs Hot bed Fixing Clip for Ender 3/CR10/Aquila/B1/B1 SE Plus Printer with 3MM Hot Bed or 4MM Glass plate
“Wide Compatibility : Fits Ender 3 , Ender 3 V2 , CR-10 , Aquila , B1 , B1 SE Plus , and other printers with 3mm hot bed or 4mm glass plate ..”
Filament for the Creality Ender-3 V2
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Ender-3 V2
Compare build volumes →
Tools for the Ender-3 V2
All tools →Creality Ender-3 V2 questions
What is the build volume of the Creality Ender-3 V2?
220 × 220 × 250 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Creality Ender-3 V2 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Creality Ender-3 V2?
1 listing names the Creality Ender-3 V2 as compatible, including Official Creality Ender 3 Series Nozzle Thermistor (3D Printing Canada). Check each listing's note for revision or adapter requirements.
Which build plates fit the Creality Ender-3 V2?
1 listing names the Creality Ender-3 V2 as compatible, including Creality Ender 3 V2 Hotbed Plate - OEM Heater with connected wire (West3D). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Creality Ender-3 V2?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Anycubic Kobra 2 (220 × 220 × 250 mm).
Did a part fit your Ender-3 V2?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
