Anycubic Kobra 2 Neo specs and build volume
The Anycubic Kobra 2 Neo is a mid-size printer with a 220 × 220 × 250 mm build volume (12.1 liters), smaller than 82% of the 376 printers we track.
Its slicer profile lists an actively heated chamber, which helps with ABS, ASA, PC and nylon.
No store listing names the Anycubic Kobra 2 Neo yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Anycubic Kobra 2 Neo
Filament for the Anycubic Kobra 2 Neo
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- ABSStock setupPrints on the stock setup
- ASAStock setupPrints on the stock setup
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCStock setupDry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- ABS+Stock setupPrints on the stock setup
- HIPSStock setupPrints on the stock setup
- PAStock setupDry before printing
- PVAStock setupDry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
Printers a similar size to the Kobra 2 Neo
Compare build volumes →
Tools for the Kobra 2 Neo
All tools →Anycubic Kobra 2 Neo questions
What is the build volume of the Anycubic Kobra 2 Neo?
220 × 220 × 250 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anycubic Kobra 2 Neo support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Anycubic Kobra 2 Neo?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Anycubic Kobra 2 (220 × 220 × 250 mm).
Did a part fit your Kobra 2 Neo?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
