TwoTrees SP-5 Klipper specs and build volume
The TwoTrees SP-5 Klipper is a large printer with a 310 × 310 × 350 mm build volume (33.6 liters), larger than 64% of the 376 printers we track.
No store listing names the TwoTrees SP-5 Klipper yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the TwoTrees SP-5 Klipper
Filament for the TwoTrees SP-5 Klipper
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the SP-5 Klipper
Compare build volumes →
Tools for the SP-5 Klipper
All tools →TwoTrees SP-5 Klipper questions
What is the build volume of the TwoTrees SP-5 Klipper?
310 × 310 × 350 mm (width × depth × height), about 33.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the TwoTrees SP-5 Klipper support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the TwoTrees SP-5 Klipper?
Qidi X-Max 3 (325 × 325 × 315 mm), Bambu Lab A2L (330 × 320 × 325 mm) and Bambu Lab H2C (330 × 320 × 325 mm).
Did a part fit your SP-5 Klipper?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.