SeeMeCNC BOSSdelta 500 0510 specs and build volume
The SeeMeCNC BOSSdelta 500 0510 is a extra-large printer with a 500 × 500 × 1000 mm build volume (250.0 liters), larger than 96% of the 376 printers we track.
Its slicer profile lists an actively heated chamber, which helps with ABS, ASA, PC and nylon, a bowden extruder and profiles for 0.4 mm, 0.5 mm, 0.7 mm and 1 mm nozzles.
No store listing names the SeeMeCNC BOSSdelta 500 0510 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the SeeMeCNC BOSSdelta 500 0510
Filament for the SeeMeCNC BOSSdelta 500 0510
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- ABSStock setupPrints on the stock setup
- ASAStock setupPrints on the stock setup
- PLA+Stock setupPrints on the stock setup
- PCStock setupDry before printing
- PCTGStock setupDry before printing
- ABS+Stock setupPrints on the stock setup
- HIPSStock setupPrints on the stock setup
- PAStock setupDry before printing
- PVAStock setupDry before printing
- TPUCheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- TPU-95ACheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
Printers a similar size to the BOSSdelta 500 0510
Compare build volumes →Tools for the BOSSdelta 500 0510
All tools →SeeMeCNC BOSSdelta 500 0510 questions
What is the build volume of the SeeMeCNC BOSSdelta 500 0510?
500 × 500 × 1000 mm (width × depth × height), about 250.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the SeeMeCNC BOSSdelta 500 0510 support?
Its slicer profile includes 0.4 mm, 0.5 mm, 0.7 mm and 1 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the SeeMeCNC BOSSdelta 500 0510?
Volumic EXO65 IDRE (602 × 650 × 630 mm), Volumic EXO65 (650 × 650 × 650 mm) and Volumic EXO65 Performance (650 × 650 × 650 mm).
Did a part fit your BOSSdelta 500 0510?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.