Meltingplot MBL 308 specs and build volume
The Meltingplot MBL 308 is a extra-large printer with a 850 × 405 × 896 mm build volume (308.4 liters), larger than 97% of the 376 printers we track.
Its slicer profile lists profiles for 0.4 mm, 0.6 mm, 0.8 mm, 1 mm and 1.2 mm nozzles.
No store listing names the Meltingplot MBL 308 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Meltingplot MBL 308
Filament for the Meltingplot MBL 308
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the MBL 308
Compare build volumes →Tools for the MBL 308
All tools →Meltingplot MBL 308 questions
What is the build volume of the Meltingplot MBL 308?
850 × 405 × 896 mm (width × depth × height), about 308.4 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Meltingplot MBL 308 support?
Its slicer profile includes 0.4 mm, 0.6 mm, 0.8 mm, 1 mm and 1.2 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Meltingplot MBL 308?
Z-Bolt S600 (600 × 600 × 900 mm), Z-Bolt S600 Dual (600 × 600 × 900 mm) and Volumic EXO65 (650 × 650 × 650 mm).
Did a part fit your MBL 308?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.