SeeMeCNC RostockMAX v3.2 specs and build volume
The SeeMeCNC RostockMAX v3.2 is a mid-size printer with a 270 × 270 × 385 mm build volume (28.1 liters), larger than 57% of the 376 printers we track.
Its slicer profile lists an actively heated chamber, which helps with ABS, ASA, PC and nylon, a bowden extruder and profiles for 0.4 mm, 0.5 mm, 0.7 mm and 1 mm nozzles.
No store listing names the SeeMeCNC RostockMAX v3.2 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the SeeMeCNC RostockMAX v3.2
Filament for the SeeMeCNC RostockMAX v3.2
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- ABSStock setupPrints on the stock setup
- ASAStock setupPrints on the stock setup
- PLA+Stock setupPrints on the stock setup
- PCStock setupDry before printing
- PCTGStock setupDry before printing
- ABS+Stock setupPrints on the stock setup
- HIPSStock setupPrints on the stock setup
- PAStock setupDry before printing
- PVAStock setupDry before printing
- TPUCheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- TPU-95ACheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
Printers a similar size to the RostockMAX v3.2
Compare build volumes →
Tools for the RostockMAX v3.2
All tools →SeeMeCNC RostockMAX v3.2 questions
What is the build volume of the SeeMeCNC RostockMAX v3.2?
270 × 270 × 385 mm (width × depth × height), about 28.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the SeeMeCNC RostockMAX v3.2 support?
Its slicer profile includes 0.4 mm, 0.5 mm, 0.7 mm and 1 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the SeeMeCNC RostockMAX v3.2?
Creality Ender-3 S1 Plus (300 × 300 × 300 mm), Creality K1 Max (300 × 300 × 300 mm) and Creality K2 Pro (300 × 300 × 300 mm).
Did a part fit your RostockMAX v3.2?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.