RH3D E3NG v1.2S specs and build volume
The RH3D E3NG v1.2S is a mid-size printer with a 232 × 232 × 245 mm build volume (13.2 liters), smaller than 70% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm nozzles.
No store listing names the RH3D E3NG v1.2S yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the RH3D E3NG v1.2S
Filament for the RH3D E3NG v1.2S
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the E3NG v1.2S
Compare build volumes →
Tools for the E3NG v1.2S
All tools →RH3D E3NG v1.2S questions
What is the build volume of the RH3D E3NG v1.2S?
232 × 232 × 245 mm (width × depth × height), about 13.2 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the RH3D E3NG v1.2S support?
Its slicer profile includes 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm and 0.6 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the RH3D E3NG v1.2S?
Creality CR-6 SE (225 × 235 × 250 mm), BIQU Hurakan (220 × 220 × 270 mm) and Creality Ender-3 S1 (220 × 220 × 270 mm).
Did a part fit your E3NG v1.2S?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.