Parts & upgrades that fit the FELIX Tec 4
The FELIX Tec 4 is a mid-size printer with a 205 × 255 × 255 mm build volume (13.3 liters), smaller than 69% of the 376 printers we track.
Its slicer profile lists 2 toolheads for multi-material printing, a direct drive extruder and profiles for 0.25 mm, 0.35 mm, 0.5 mm and 0.7 mm nozzles.
We found 1 parts listed as compatible with it, led by 1 nozzles, from 1 store: Micro Swiss.
Where to buy the FELIX Tec 4
Nozzles for the FELIX Tec 4
Plated Wear Resistant nozzle for Wanhao i3 Mini / MP Select Mini / Felix Tec4 / ProFab Mini / Malyan M200
Listed as compatibleNozzlesMicro Swiss
Filament for the FELIX Tec 4
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Tec 4
Compare build volumes →
Tools for the Tec 4
All tools →FELIX Tec 4 questions
What is the build volume of the FELIX Tec 4?
205 × 255 × 255 mm (width × depth × height), about 13.3 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the FELIX Tec 4 support?
Its slicer profile includes 0.25 mm, 0.35 mm, 0.5 mm and 0.7 mm nozzles.
Which nozzles fit the FELIX Tec 4?
1 listing names the FELIX Tec 4 as compatible, including Plated Wear Resistant nozzle for Wanhao i3 Mini / MP Select Mini / Felix Tec4 / ProFab Mini / Malyan M200 (Micro Swiss). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the FELIX Tec 4?
Creality CR-6 SE (225 × 235 × 250 mm), BIQU Hurakan (220 × 220 × 270 mm) and Creality Ender-3 S1 (220 × 220 × 270 mm).
Did a part fit your Tec 4?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.