MM slb specs and build volume
The MM slb is a compact printer with a 125 × 125 × 160 mm build volume (2.5 liters), smaller than 99% of the 376 printers we track.
No store listing names the MM slb yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the MM slb
Filament for the MM slb
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the slb
Compare build volumes →
Tools for the slb
All tools →MM slb questions
What is the build volume of the MM slb?
125 × 125 × 160 mm (width × depth × height), about 2.5 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the MM slb support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the MM slb?
Sovol Zero (152 × 152 × 152 mm), Voron 0.1 (120 × 120 × 120 mm) and Cubicon xCeler-Mini (150 × 150 × 150 mm).
Did a part fit your slb?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.