M3D Enabler D7500 specs and build volume
The M3D Enabler D7500 is a compact printer with a 150 × 150 × 150 mm build volume (3.4 liters), smaller than 98% of the 376 printers we track.
No store listing names the M3D Enabler D7500 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the M3D Enabler D7500
Filament for the M3D Enabler D7500
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the D7500
Compare build volumes →
Tools for the D7500
All tools →M3D Enabler D7500 questions
What is the build volume of the M3D Enabler D7500?
150 × 150 × 150 mm (width × depth × height), about 3.4 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the M3D Enabler D7500 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the M3D Enabler D7500?
Sovol Zero (152 × 152 × 152 mm), Cubicon xCeler-Mini (150 × 150 × 150 mm) and Flashforge Adventurer 3 Series (150 × 150 × 150 mm).
Did a part fit your D7500?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.