Goofoo Velo+ specs and build volume
The Goofoo Velo+ is a extra-large printer with a 600 × 500 × 600 mm build volume (180.0 liters), larger than 95% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.4 mm and 0.6 mm nozzles.
No store listing names the Goofoo Velo+ yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Goofoo Velo+
Filament for the Goofoo Velo+
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PETG-CFStock setupAn enclosure helps · Dry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupAn enclosure helps · Dry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PA6-CFStock setupAn enclosure helps · Dry before printing
- PET-CFStock setupAn enclosure helps · Dry before printing
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
Printers a similar size to the Velo+
Compare build volumes →
Tools for the Velo+
All tools →Goofoo Velo+ questions
What is the build volume of the Goofoo Velo+?
600 × 500 × 600 mm (width × depth × height), about 180.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Goofoo Velo+ support?
Its slicer profile includes 0.2 mm, 0.4 mm and 0.6 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Goofoo Velo+?
re3D Gigabot 4 (590 × 600 × 600 mm), Comgrow T500 (500 × 500 × 500 mm) and Sovol SV08 MAX (500 × 500 × 500 mm).
Did a part fit your Velo+?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.