FELIX Pro XL 3.0 specs and build volume
The FELIX Pro XL 3.0 is a extra-large printer with a 600 × 400 × 600 mm build volume (144.0 liters), larger than 95% of the 376 printers we track.
Its slicer profile lists 2 toolheads for multi-material printing, a direct drive extruder and profiles for 0.25 mm, 0.35 mm, 0.5 mm and 0.7 mm nozzles.
No store listing names the FELIX Pro XL 3.0 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the FELIX Pro XL 3.0
Filament for the FELIX Pro XL 3.0
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Pro XL 3.0
Compare build volumes →
Tools for the Pro XL 3.0
All tools →FELIX Pro XL 3.0 questions
What is the build volume of the FELIX Pro XL 3.0?
600 × 400 × 600 mm (width × depth × height), about 144.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the FELIX Pro XL 3.0 support?
Its slicer profile includes 0.25 mm, 0.35 mm, 0.5 mm and 0.7 mm nozzles.
Which printers are a similar size to the FELIX Pro XL 3.0?
Comgrow T500 (500 × 500 × 500 mm), Sovol SV08 MAX (500 × 500 × 500 mm) and Meltingplot MBL 136 (850 × 405 × 396 mm).
Did a part fit your Pro XL 3.0?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.