Goofoo GP1 specs and build volume
The Goofoo GP1 is a mid-size printer with a 250 × 250 × 250 mm build volume (15.6 liters), smaller than 63% of the 376 printers we track.
No store listing names the Goofoo GP1 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Goofoo GP1
Filament for the Goofoo GP1
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the GP1
Compare build volumes →
Tools for the GP1
All tools →Goofoo GP1 questions
What is the build volume of the Goofoo GP1?
250 × 250 × 250 mm (width × depth × height), about 15.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Goofoo GP1 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Goofoo GP1?
Anycubic Kobra S1 (250 × 250 × 250 mm), BIQU BX (250 × 250 × 250 mm) and BIQU B1 (235 × 235 × 270 mm).
Did a part fit your GP1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.