Geeetech Mizar Max specs and build volume
The Geeetech Mizar Max is a large printer with a 320 × 320 × 400 mm build volume (41.0 liters), larger than 73% of the 376 printers we track.
Its slicer profile lists a bowden extruder and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Geeetech Mizar Max yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Geeetech Mizar Max
Filament for the Geeetech Mizar Max
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- TPUCheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- TPU-95ACheck firstHard to feed through a Bowden tube: print slowly · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the Mizar Max
Compare build volumes →
Tools for the Mizar Max
All tools →Geeetech Mizar Max questions
What is the build volume of the Geeetech Mizar Max?
320 × 320 × 400 mm (width × depth × height), about 41.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Geeetech Mizar Max support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Geeetech Mizar Max?
Voron 2.4 (350 × 350 × 325 mm), Sovol SV08 (350 × 350 × 345 mm) and Anycubic Kobra S1 Max (350 × 350 × 350 mm).
Did a part fit your Mizar Max?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.