Flashforge Adventurer 4 Series specs and build volume
The Flashforge Adventurer 4 Series is a mid-size printer with a 220 × 200 × 250 mm build volume (11.0 liters), smaller than 85% of the 376 printers we track.
Its slicer profile lists profiles for 0.3 mm, 0.4 mm and 0.6 mm nozzles.
No store listing names the Flashforge Adventurer 4 Series yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Flashforge Adventurer 4 Series
Filament for the Flashforge Adventurer 4 Series
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
Printers a similar size to the Adventurer 4 Series
Compare build volumes →
Tools for the Adventurer 4 Series
All tools →Flashforge Adventurer 4 Series questions
What is the build volume of the Flashforge Adventurer 4 Series?
220 × 200 × 250 mm (width × depth × height), about 11.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Flashforge Adventurer 4 Series support?
Its slicer profile includes 0.3 mm, 0.4 mm and 0.6 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Flashforge Adventurer 4 Series?
Prusa MK3.5 (250 × 210 × 210 mm), Prusa MK3S (250 × 210 × 210 mm) and Qidi X-Plus (270 × 200 × 200 mm).
Did a part fit your Adventurer 4 Series?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
