Parts & upgrades that fit the Flashforge Guider 2s
The Flashforge Guider 2s is a large printer with a 280 × 250 × 300 mm build volume (21.0 liters), smaller than 51% of the 376 printers we track.
We found 1 parts listed as compatible with it, led by 1 hotends & heaters, from 1 store: Micro Swiss.
Where to buy the Flashforge Guider 2s
Hotends & heaters for the Flashforge Guider 2s
Micro Swiss All Metal Hotend Kit for Flashforge Finder / Inventor 2 / Guider 2 / 2S / Dremel 3D40
Listed as compatibleHotends & heatersMicro Swiss
Filament for the Flashforge Guider 2s
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Guider 2s
Compare build volumes →
Tools for the Guider 2s
All tools →Flashforge Guider 2s questions
What is the build volume of the Flashforge Guider 2s?
280 × 250 × 300 mm (width × depth × height), about 21.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Flashforge Guider 2s support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Flashforge Guider 2s?
1 listing names the Flashforge Guider 2s as compatible, including Micro Swiss All Metal Hotend Kit for Flashforge Finder / Inventor 2 / Guider 2 / 2S / Dremel 3D40 (Micro Swiss). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Flashforge Guider 2s?
Qidi X-Plus 3 (280 × 280 × 270 mm), Creality Hi (260 × 260 × 300 mm) and Sovol SV01 (280 × 240 × 300 mm).
Did a part fit your Guider 2s?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.