Flashforge Adventurer 5M Pro specs and build volume
The Flashforge Adventurer 5M Pro is a mid-size printer with a 220 × 220 × 220 mm build volume (10.6 liters), smaller than 87% of the 376 printers we track.
Its slicer profile lists profiles for 0.25 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Flashforge Adventurer 5M Pro yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Flashforge Adventurer 5M Pro
Filament for the Flashforge Adventurer 5M Pro
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · An enclosure helps · Dry before printing
Printers a similar size to the Adventurer 5M Pro
Compare build volumes →
Tools for the Adventurer 5M Pro
All tools →Flashforge Adventurer 5M Pro questions
What is the build volume of the Flashforge Adventurer 5M Pro?
220 × 220 × 220 mm (width × depth × height), about 10.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Flashforge Adventurer 5M Pro support?
Its slicer profile includes 0.25 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Flashforge Adventurer 5M Pro?
Flashforge AD5X (220 × 220 × 220 mm), Flashforge Adventurer 5M (220 × 220 × 220 mm) and Qidi X-Plus (270 × 200 × 200 mm).
Did a part fit your Adventurer 5M Pro?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
