D12 230 PRO SMARTPAD DIRECT specs and build volume
The D12 230 PRO SMARTPAD DIRECT is a mid-size printer with a 230 × 230 × 240 mm build volume (12.7 liters), smaller than 73% of the 376 printers we track.
No store listing names the D12 230 PRO SMARTPAD DIRECT yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the D12 230 PRO SMARTPAD DIRECT
Filament for the D12 230 PRO SMARTPAD DIRECT
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the 230 PRO SMARTPAD DIRECT
Compare build volumes →
Tools for the 230 PRO SMARTPAD DIRECT
All tools →D12 230 PRO SMARTPAD DIRECT questions
What is the build volume of the D12 230 PRO SMARTPAD DIRECT?
230 × 230 × 240 mm (width × depth × height), about 12.7 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the D12 230 PRO SMARTPAD DIRECT support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the D12 230 PRO SMARTPAD DIRECT?
Voron Switchwire (250 × 210 × 240 mm), Creality CR-10 SE (220 × 220 × 265 mm) and BIQU Hurakan (220 × 220 × 270 mm).
Did a part fit your 230 PRO SMARTPAD DIRECT?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.