CoLiDo SR1 specs and build volume
The CoLiDo SR1 is a mid-size printer with a 220 × 220 × 251 mm build volume (12.1 liters), smaller than 75% of the 376 printers we track.
No store listing names the CoLiDo SR1 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the CoLiDo SR1
Filament for the CoLiDo SR1
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the SR1
Compare build volumes →
Tools for the SR1
All tools →CoLiDo SR1 questions
What is the build volume of the CoLiDo SR1?
220 × 220 × 251 mm (width × depth × height), about 12.1 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the CoLiDo SR1 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the CoLiDo SR1?
Anker M5C (220 × 220 × 250 mm), Anycubic Kobra (220 × 220 × 250 mm) and Anycubic Kobra 2 (220 × 220 × 250 mm).
Did a part fit your SR1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.