Anycubic Kobra 2 Plus specs and build volume
The Anycubic Kobra 2 Plus is a large printer with a 320 × 320 × 400 mm build volume (41.0 liters), larger than 73% of the 376 printers we track.
No store listing names the Anycubic Kobra 2 Plus yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Anycubic Kobra 2 Plus
Filament for the Anycubic Kobra 2 Plus
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the Kobra 2 Plus
Compare build volumes →
Tools for the Kobra 2 Plus
All tools →Anycubic Kobra 2 Plus questions
What is the build volume of the Anycubic Kobra 2 Plus?
320 × 320 × 400 mm (width × depth × height), about 41.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anycubic Kobra 2 Plus support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Anycubic Kobra 2 Plus?
Voron 2.4 (350 × 350 × 325 mm), Sovol SV08 (350 × 350 × 345 mm) and Anycubic Kobra S1 Max (350 × 350 × 350 mm).
Did a part fit your Kobra 2 Plus?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
