Anycubic Kobra 2 Max specs and build volume
The Anycubic Kobra 2 Max is a extra-large printer with a 420 × 420 × 500 mm build volume (88.2 liters), larger than 87% of the 376 printers we track.
No store listing names the Anycubic Kobra 2 Max yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Anycubic Kobra 2 Max
Filament for the Anycubic Kobra 2 Max
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the Kobra 2 Max
Compare build volumes →
Tools for the Kobra 2 Max
All tools →Anycubic Kobra 2 Max questions
What is the build volume of the Anycubic Kobra 2 Max?
420 × 420 × 500 mm (width × depth × height), about 88.2 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Anycubic Kobra 2 Max support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Anycubic Kobra 2 Max?
Creality CR-10 Max (450 × 450 × 470 mm), Creality CR-M4 (450 × 450 × 470 mm) and Anycubic Kobra 3 Max (426 × 420 × 501 mm).
Did a part fit your Kobra 2 Max?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
