WEMAKE3D TinyBotV1 specs and build volume
The WEMAKE3D TinyBotV1 is a mid-size printer with a 210 × 210 × 400 mm build volume (17.6 liters), smaller than 56% of the 376 printers we track.
Its slicer profile lists profiles for 0.2 mm, 0.3 mm, 0.4 mm and 0.6 mm nozzles.
No store listing names the WEMAKE3D TinyBotV1 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the WEMAKE3D TinyBotV1
Filament for the WEMAKE3D TinyBotV1
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with brass) · An enclosure helps · Dry before printing
Printers a similar size to the TinyBotV1
Compare build volumes →
Tools for the TinyBotV1
All tools →WEMAKE3D TinyBotV1 questions
What is the build volume of the WEMAKE3D TinyBotV1?
210 × 210 × 400 mm (width × depth × height), about 17.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the WEMAKE3D TinyBotV1 support?
Its slicer profile includes 0.2 mm, 0.3 mm, 0.4 mm and 0.6 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the WEMAKE3D TinyBotV1?
Anycubic Kobra X (260 × 260 × 260 mm), Creality K2 (260 × 260 × 260 mm) and Bambu Lab X2D (256 × 256 × 261 mm).
Did a part fit your TinyBotV1?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.