Volumic VS30SC2 specs and build volume
The Volumic VS30SC2 is a large printer with a 300 × 200 × 310 mm build volume (18.6 liters), smaller than 54% of the 376 printers we track.
No store listing names the Volumic VS30SC2 yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Volumic VS30SC2
Filament for the Volumic VS30SC2
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the VS30SC2
Compare build volumes →
Tools for the VS30SC2
All tools →Volumic VS30SC2 questions
What is the build volume of the Volumic VS30SC2?
300 × 200 × 310 mm (width × depth × height), about 18.6 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Volumic VS30SC2 support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Volumic VS30SC2?
Qidi Q2 (270 × 270 × 256 mm), Qidi Q2C (270 × 270 × 256 mm) and Snapmaker U1 (270 × 270 × 270 mm).
Did a part fit your VS30SC2?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.