Parts & upgrades that fit the Qidi Q2C
The Qidi Q2C is a mid-size printer with a 270 × 270 × 256 mm build volume (18.7 liters), smaller than 53% of the 376 printers we track.
Its slicer profile lists an actively heated chamber, which helps with ABS, ASA, PC and nylon and profiles for 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles.
We found 4 parts listed as compatible with it, led by 2 spare parts, 1 hotends & heaters and 1 enclosure & cooling, from 3 stores: Fabreeko, Phaetus and QIDI.
Where to buy the Qidi Q2C
Stores that list the Q2C itself, with their listed price when we last read them.
Hotends & heaters for the Qidi Q2C
Conch Hotend® For QiDi Q2&Q2C
Enclosure & cooling for the Qidi Q2C
Qidi Q2 Hotend Cooling Fan
Listed as compatibleEnclosure & coolingQIDIsold by Fabreeko“Compatible with both Q2 and Q2C.”
Spare parts for the Qidi Q2C
Q2/Q2C/Plus4 Wiper Silicone Case (5pcs)
Listed as compatibleSpare partsQIDIPLUS5/Q2/Q2C Cutter Blade*5
Listed as compatibleSpare partsQIDI
Filament for the Qidi Q2C
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- ABSStock setupPrints on the stock setup
- ASAStock setupPrints on the stock setup
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCStock setupDry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- ABS+Stock setupPrints on the stock setup
- HIPSStock setupPrints on the stock setup
- PAStock setupDry before printing
- PVAStock setupDry before printing
- PETG-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
- PLA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
- ASA-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
- PA6-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
- PET-CFNeeds a partAbrasive: needs a hardened nozzle (ships with stainless steel) · Dry before printing
Printers a similar size to the Q2C
Compare build volumes →
Tools for the Q2C
All tools →Qidi Q2C questions
What is the build volume of the Qidi Q2C?
270 × 270 × 256 mm (width × depth × height), about 18.7 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Qidi Q2C support?
Its slicer profile includes 0.2 mm, 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which hotends fit the Qidi Q2C?
1 listing names the Qidi Q2C as compatible, including Conch Hotend® For QiDi Q2&Q2C (Phaetus). Check each listing's note for revision or adapter requirements.
Which printers are a similar size to the Qidi Q2C?
Qidi Q2 (270 × 270 × 256 mm), Snapmaker U1 (270 × 270 × 270 mm) and Anycubic Kobra X (260 × 260 × 260 mm).
Did a part fit your Q2C?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.
