Vivedino Xplorer IQEX specs and build volume
The Vivedino Xplorer IQEX is a extra-large printer with a 400 × 343 × 401 mm build volume (55.0 liters), larger than 80% of the 376 printers we track.
Its slicer profile lists 4 toolheads for multi-material printing, an actively heated chamber, which helps with ABS, ASA, PC and nylon, a direct drive extruder and profiles for 0.4 mm, 0.6 mm and 0.8 mm nozzles.
No store listing names the Vivedino Xplorer IQEX yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Vivedino Xplorer IQEX
Filament for the Vivedino Xplorer IQEX
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- ABSStock setupPrints on the stock setup
- ASAStock setupPrints on the stock setup
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCStock setupDry before printing
- PETG-CFStock setupDry before printing
- PLA-CFStock setupDry before printing
- ASA-CFStock setupDry before printing
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- ABS+Stock setupPrints on the stock setup
- HIPSStock setupPrints on the stock setup
- PAStock setupDry before printing
- PA6-CFStock setupDry before printing
- PET-CFStock setupDry before printing
- PVAStock setupDry before printing
Printers a similar size to the Xplorer IQEX
Compare build volumes →
Tools for the Xplorer IQEX
All tools →Vivedino Xplorer IQEX questions
What is the build volume of the Vivedino Xplorer IQEX?
400 × 343 × 401 mm (width × depth × height), about 55.0 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Vivedino Xplorer IQEX support?
Its slicer profile includes 0.4 mm, 0.6 mm and 0.8 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Vivedino Xplorer IQEX?
Creality CR-6 Max (390 × 390 × 400 mm), Creality Ender-5 Plus (350 × 350 × 400 mm) and Vivedino Xplorer Dual Gantry (400 × 343 × 401 mm).
Did a part fit your Xplorer IQEX?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.