Vivedino Troodon 2.0 - Klipper specs and build volume
The Vivedino Troodon 2.0 - Klipper is a large printer with a 350 × 350 × 330 mm build volume (40.4 liters), larger than 73% of the 376 printers we track.
No store listing names the Vivedino Troodon 2.0 - Klipper yet. Below are its specs and the printers closest to it in size; if you have fitted a part, report it so other owners can find it.
Where to buy the Vivedino Troodon 2.0 - Klipper
Filament for the Vivedino Troodon 2.0 - Klipper
Temperatures by brand →Read from its slicer profile: stock nozzle, heated chamber and extruder, against what each material needs.
- PLAStock setupPrints on the stock setup
- PETGStock setupDry before printing
- TPUStock setupDry before printing
- PLA+Stock setupPrints on the stock setup
- PCTGStock setupDry before printing
- TPU-95AStock setupDry before printing
- HIPSStock setupAn enclosure helps
- PVAStock setupDry before printing
- ABSCheck firstWarps in drafts: print enclosed (no heated chamber listed)
- ASACheck firstWarps in drafts: print enclosed (no heated chamber listed)
- PCCheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PETG-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PLA-CFCheck firstAbrasive: check your nozzle is hardened · Dry before printing
- ASA-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- ABS+Check firstWarps in drafts: print enclosed (no heated chamber listed)
- PACheck firstWarps in drafts: print enclosed (no heated chamber listed) · Dry before printing
- PA6-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
- PET-CFCheck firstAbrasive: check your nozzle is hardened · An enclosure helps · Dry before printing
Printers a similar size to the Troodon 2.0 - Klipper
Compare build volumes →
Tools for the Troodon 2.0 - Klipper
All tools →Vivedino Troodon 2.0 - Klipper questions
What is the build volume of the Vivedino Troodon 2.0 - Klipper?
350 × 350 × 330 mm (width × depth × height), about 40.4 liters of printable space, per its OrcaSlicer profile.
What nozzle sizes does the Vivedino Troodon 2.0 - Klipper support?
Its slicer profile includes 0.4 mm nozzles. 0.4 mm is the usual default.
Which printers are a similar size to the Vivedino Troodon 2.0 - Klipper?
Voron 2.4 (350 × 350 × 325 mm), Sovol SV08 (350 × 350 × 345 mm) and Anycubic Kobra S1 Max (350 × 350 × 350 mm).
Did a part fit your Troodon 2.0 - Klipper?
Tell us what you installed. We review every report, and confirmed ones are marked as verified fits.